| About Us |
| Stoney Chondrites |
| Custom Display Stands |
| KD Meteorite Collection! |
| Gift Ideas |
| E-bay Items |
| Sales and Specials! |
| Check Out |
| Contact Us |
| Links |
|
|
| Instructions for removing Table and Lights from Stand |
|
|
| 1) Disconnect wires under table- be sure to plug like colors when connecting it back together. 2) Lights can remain on table when table is separated from stand OR they can be removed. If removing lights- unplug connectors then remove the single nut under the table for each light. Pull the connectors through the hole to separate lights from the table. 3) Remove the two 3/32 allen screws (allen wrench provided) located in the cap just below the turntable. 4) Gently pull the cap up and unplug the motor connector wires. The wires are reversible so it will not matter how they are plugged back in. 5) Remove the two 5/16 allen bolts (wrench provided) in the bottom of the housing. 6) Gently lift the table from the stand while at the same time feeding the wire connectors through the access hole. 7) The table is now off the stand. The stands and legs are permanently attached. |
|
|
|
|